AT&T 3G Sunset – Required Cellular Firmware Update for 110g

AT&T is turning off their 3G network on 2/22/22, which affects the Quectel modems on the 110g Airwall Gateway, and any AV3200g/u Airwall Gateways installed before Dec 12, 2021. If you are operating one of these Airwall Gateways using an AT&T cellular connection, you should install new cellular firmware on them before the AT&T shutoff date.

Warning: To avoid disruptions in your AT&T cellular service, you must update your cellular firmware on 110g Airwall Gateways before 2/22/22. If you do not, you will have to have an ethernet connection or perform on-site diagnostics for all impacted Airwall Gateways to restore reliable cell connectivity.
Attention: If you already updated Airwall Gateways that are using T-Mobile cellular – Install the latest (build 125) update to correct any issues.
Supported Versions
v2.2.0 and later Airwall Gateways and Conductor
Supported Cellular Services
  • AT&T - Required
  • T-Mobile on 110g - Supported.
  • T-Mobile on Advantech ICR-32xx – Not certified by Advantech.
  • All others - Optional

Check if you need the update

  1. In the Conductor, go to Airwalls, and open the page for the Airwall Gateway 110g or Advantech ICR-32xx that you want to check.
  2. Open Diagnostics.
  3. Select Request a diagnostic report.

    Airwall Diagnostics tab

  4. Wait for it to build the report, and then download it.
  5. Open the report and search for Cellular Firmware package revision. Check that it shows 4c5753a:

    The correct Cellular firmware package revision is 4c5753a

If you are checking several Airwall Gateways, tag the ones that are not updated so you can easily search for them when applying the update.

Update your Cellular Firmware

  1. Check that your Conductor has the cellular firmware update, or download the "Hotfix for AT&T 3G Sunset Airwall Gateway 110" (filename is Airwall-110_cellfw-4c5753a-125_package) or Advantech 32xx (filename is Airwall-112_cellfw-4c5753a-125_package) from Hotfixes or Cellular modem firmware.
  2. If you downloaded the file, in the Conductor, upload the cellular firmware packages:
    1. Go to Settings > General Settings.
    2. Under Firmware updates, select Upload firmware.
    3. Select Choose file, and select the firmware package you downloaded.
    4. Select Upload.
  3. Go to Airwalls, and select all of your 110g (or Advantech, if needed) Airwall Gateways.
  4. Select Airwall actions > Install Hotfix. These images show updating 110g Airwall Gateways.

    Install Hotfixes opens the Apply Firmware Updates dialog showing quectel modem hotfix

  5. Under Update available, select cellfw-1dfe737 for each Airwall Gateway.
  6. Select Apply. The new firmware will be installed as each Airwall Gateway connects to the Conductor.
Note: You can also find the firmware update under Settings > Firmware updates and select Install.
Tip: After you’ve updated these Airwall Gateways, use Airwall actions > Edit tags and tag them (with something like “Ready for AT&T Sunset”) to indicate they’ve been updated.