Moving an Airwall Gateway to a different Conductor

You can move an Airwall Gateway to a different Conductor by configuring the same Shared Airwall key between two Conductors.

  1. On the old Conductor, in Settings > Orchestration settings, under Conductor Addresses, add the new Conductor as if it was another address or hostname for the old Conductor. The new Conductor's address should be the first one on the list.
  2. Copy the old Conductor's Shared Airwall key from the box in the user interface.
    Conductor Orchestration settings showing adding a new Conductor address and Shared Airwall key
  3. In the new Conductor, in Settings > Orchestration settings, under Shared Airwall key, set the Shared Airwall key that was copied in the step above.
  4. Reboot the Airwall Gateway from the user interface.
  5. Leave the old Conductor on until all Airwall Gateways you want to move have connected to the new Conductor.
    Note: As the moved Airwall Gateways connect to the new Conductor, they show up as unmanaged.
  6. Shut off the old Conductor.