Manage Airwall Gateways remotely with Airshell

Use the Airshell command line to run diagnostic and configuration commands directly from the Conductor for online Airwall Gateways and for the Conductor.

Supported Roles
System and Network Administrators with Allow Remote Airsh permissions and Edit permissions for the Airwall Gateway.
Supported Versions
v3.1.0 Conductors and Airwall Gateways
Supported Airwall Edge Services
Online Airwall Gateways
Supported Airshell Commands
You can run most Airshell commands. Exceptions: shutdown, network configuration commands (commands that risk disconnecting the Airwall permanently from the Conductor). Enter help for a list of available commands.
  1. For an Airwall Gateway, in the Conductor, open the page for an online Airwall Gateway, and then select the Airshell tab.
    For Conductor Airshell, go to Settings > Airshell.
  2. Select Open Remote Airshell.
  3. Enter the Airshell commands you need.
  4. When done, enter exit, or just navigate to a different page.
Note: Airshell sessions automatically disconnect after 10 minutes of inactivity. To continue, select Reconnect.