Home
Deploy Airwall™
Successfully deploy and configure the Airwall solution and revolutionize security on your network.
Deploy an Airwall secure network
Learn how to deploy the Airwall solution, connect devices, set up overlays, configure device trust, and give people access to your Airwall secure network.
Connect and Configure Devices
As you prepare to connect devices to Airwall Gateways, you may want your Airwall Gateway product guide available to identify the ports reserved for connecting devices you want to protect.
Add devices to the Conductor
After you connect devices to Airwall Gateway hardware, there are four ways to add a device to the Conductor.
Overlay network default route
Starting in version 2.1.3, Airwall Gateways now support the option of setting a default route on the overlay network. This can be set on a per Airwall Gateway basis under the Local Devices > Overlay Routes section.
Create an overlay network default route
To create an overlay network default route:

Create an overlay network default route

To create an overlay network default route:

Navigate to the Airwalls page and select an Airwall Edge Service.
Add a new overlay route with a Target Network Address set to 0.0.0.0/0 and set the Gateway to the next hop gateway.

Note: This next hop gateway needs to be within the same subnet as the subnet used for the Airwall Gateway's Overlay Gateway IP.