Allow VLAN tagged traffic in your overlay network

If your overlay network needs to support VLAN tagged traffic, you must explicitly allow VLAN tagging:

  1. Go to Overlays and select an overlay network.
  2. In the Info section, click Edit Settings.
  3. In the overlay dialog, click the VLAN tagged traffic tab and set the following:
    1. Specify if tagged or untagged traffic is allowed on your network.
    2. In Allowed tags, enter VLAN tags separated by commas. You may specify tags from 0 to 4095. Leave the field blank if you want to accept any VLAN tag.
  4. Click Save.