Create an overlay network default route

Home
Online Documentation
Learning about Tempered Networks and our products is a great way to get started with our IDN solution.
Installation and Configuration
Learn how to install the different product components, set up overlays, and configure device trust in six simple steps.
Connect and Configure Devices
As you prepare to connect devices to HIPswitches, you may want your HIPswitch product guide available to identify the ports reserved for connecting devices you want to protect.
Add devices to the Conductor
After you connect devices to HIPswitch hardware, there are four ways to add a device to the Conductor.
Overlay network default route
Starting in version 2.1.3, HIPswitches now support the option of setting a default route on the overlay network. This can be set on a per HIPswitch basis under the Local Devices > Overlay Routes section.
Create an overlay network default route
To create an overlay network default route:

Create an overlay network default route

To create an overlay network default route:

Navigate to the HIPservices page and select a HIPservice
Add a new overlay route with a Target Network Address set to 0.0.0.0/0 and set Gateway to the next hop gateway

Note: This next hop gateway needs to be within the same subnet as the subnet used for the HIPswitch's Overlay Gateway IP.