Connect with a Windows Airwall Agent or Server

How to connect to an Airwall secure network with a Windows Airwall Agent or Server.

Connect to the Airwall secure network

Open the Airwall Agent or Server. If it does not connect automatically, on the Windows taskbar, right-click the Tempered icon, and select Start.

Manage Profiles

    • To create a new profile, from the Control Panel, click the gear , and click + to add a new profile.
    • To edit an existing profile, from the Control Panel, click the gear, and select a profile to edit it.
    • To switch profiles:
      1. From the Control Panel, click the gear. (You can also right-click the Airwall Agent icon, and select Configure.)
      2. On the Configure page, if the profile you want has the double arrows to the left, it’s already the Active profile. If it doesn’t, select the profile you want to use.
      3. Click the gears icon gears icon on the profile page below the profile list, and choose Make profile active.
      4. Select OK. The Agent disconnects and then connects with the new profile. This can take a few minutes.
    • To delete a profile, select it and click -.

Windows Airwall Agent Configure page

Find your device ID

If you are still not connected, you may need to provide your device ID to the administrator for your Airwall secure network. You can find and copy it from the top of the Airwall Agent/Server Control panel. Click the icon on the right to copy the device ID:

Airwall Agent Control Panel

Check your Connection

  1. Open the Airwall Agent or Server.
  2. At the top, you will see either Stopped or Running.
    1. If it is Stopped, the profile is still loading and connecting.
    2. If it is Running, the profile is running, but not necessarily connected.
  3. When it says Running, just to the right, select the overlay icon .
  4. Under Conductor and Authentication, check to see your connection status next to Conductor. If you are connected, it has a green dot and says Connected.
  5. You can also see the resources this profile gives you access to under Network Policies and Peer Devices:
    1. To see the devices you have access to, open the Overlays tab.
    2. To see the Airwalls you have access to, open the Underlay tab.
  6. To refresh the list, select Ping opened network.

Disconnect from the Airwall secure network

Right-click the Airwall Agent icon, and select Stop.Windows Airwall Agent right-click menu