Configure Airwall Relay rules

Configure Airwall Relay rules to establish secure connections between Airwall Edge Services that cannot directly connect.

You must have permission to edit policy for all of the Airwall Edge Services you are adding to the relay rules.
  1. In the Conductor, go to Airwalls and open Airwall relay rules.
  2. Select New relay rule (before v3.0 Conductors: Create rule), name the rule, provide a description, and select Create. The relay rule is added to the relay rule table.
  3. Scroll down in the table to find the rule you created.
  4. Hover over the Communicate via Airwall relay column, select the edit icon Edit icon (pencil), and then pick the Airwall Relay or Airwall Relay group you want to create a rule for. Select Save.
    Setting up a relay rule in the relay rule table
  5. Under the Airwalls column to the left, select the Airwall Edge Services or groups in one area that you want to connect with the relay. Select Save.
  6. Under the Airwalls column to the right, select the Airwall Edge Services or groups in another area that you want to connect with the relay. Select Save.
  7. You can continue adding rules to connect any Airwall Edge Services that require an Airwall Relay to communicate.
Note: Managed relay rules do not normally display on the Airwalls>Airwall relay rules tab. If you want to see them, you can go to Airwalls > Airwall relay rules and at the top right, check Display system relay rules.