Measure wireless signal strength - WiFi and cellular

There are two methods to determine the signal strength of a WiFi-enabled Airwall Gateway.

  1. Go to Airwalls and select an Airwall Edge Service from the list. Click Reporting, where the signal strength is reported every five minutes.
  2. Place the Airwall Gateway in diagnostic mode. See Put an Airwall Gateway into diagnostic mode for more information.
  3. Once the Airwall Gateway is in diagnostic mode, select Status on the diagnostic page.
  4. The wireless signal strength is displayed. Refresh the diagnostic mode page to update the signal strength. Signal strength is updated every 5 seconds.