Put the Conductor into diagnostic mode

Placing the Conductor into diagnostic mode requires console access with a VGA monitor and USB keyboard.

When the Conductor is in diagnostic mode, you can:
  • Download a Conductor support bundle
  • Display system status
  • Perform firmware updates
  • Enable and disable SSH (SSH is disabled by default)

To put the Conductor into diagnostic mode

  1. At the login prompt enter the username <diag> and the password <diag>.
  2. connect your laptop to the Conductor's first network adapter (NIC1) and configure your laptop adapter to use DHCP.
  3. Once your laptop obtains an IP address, open a web browser and navigate to http://192.168.56.3 and the Conductor diagnostic page loads.