Release Notes 2.2.5
Release Date: Apr 17, 2020
What’s New
- Support for NAT Subnet Broadcasts
- The Airwall Solution now supports NATing subnet broadcasts on the device network.
- New Airwall help content
Upgrade Considerations
Consider upgrading to 2.2.5 if:
| You were impacted by any issues discovered in prior releases, especially if you have any of the following: |
| Heavy use of broadcast/multicast traffic. |
| Applying a new ports configuration resulted in overlay ports staying down until next reboot. |
|
Tunnel failures after cellular outages. |
Fixes
| ID | Applies to | Description |
|---|---|---|
| DEV-13132 | Conductor | Improved validation of Conductor device imports. |
| DEV-13087 | Android Airwall Agent | Fixed an issue where user was unable to log in with user auth on Android. |
| DEV-13086 | Conductor | Airwall port configuration changes made from the Conductor are now noted in the PCI user activities log |
| DEV-13067 | Android Airwall Agent | Fixed Push-to-Talk not working on Android over Cellular. |
| DEV-13065 | Android Airwall Agent | Fixed Android issue with sending User Auth credentials causing crashes. |
|
DEV-13031 DEV-12954 |
Conductor | Agent hostnames are now being shown correctly for provisioning requests. |
| DEV-13027 | Conductor | Added new PCI logs for Airwall reconnect support function: Starting a PCAP, stopping a PCAP, requesting a support bundle, and requesting a diagnostic report. |
|
DEV-13002 DEV-12938 |
Airwall Gateway | Fixed an issue that caused the reboot setting in the underlay Failover Settings tab to have no effect if any underlay port groups were configured as standalone. |
|
DEV-12998 DEV-12930 |
Conductor | Fixed an issue that could cause the packet capture feature in the old Conductor support tab to show no capture interfaces. |
| DEV-12997 | Conductor | Fixed an issue that could cause serial-over-IP to be come unresponsive after cellular outages. |
| DEV-12996 | Conductor | Fixed an issue to allow users to request multiple support bundles at the same time. |
|
DEV-12995 DEV-12871 |
Conductor | Fixed a bug that could cause HIP tunnels to become stale after temporary cellular outages. |
|
DEV-12994 DEV-12866 |
Conductor | Some event actions have a target box. Filtering the target box by name is now working. Additionally you can select "+ more" to see more entries at the same time. |
|
DEV-12992 DEV-12083 |
Conductor | Fixed a UI error when modifying the recipient list of an existing alert. |
| DEV-12991 | Android Airwall Agent | Fixed Android Airwall Agent sending localhost as the hostname in its provisioning request. |
| DEV-12984 |
Airwall-75 Airwall-150 Airwall-250 |
Fixed an issue where applying certain types of port configurations caused the overlay ports fail to link up until the next reboot of the Airwall. Note: This issue may still occur in a configuration where only VLAN-tagged ports are assigned to overlay port groups. To work around this, ensure that at least one untagged port is assigned to an overlay port group. |
| DEV-12964 | Airwall Gateway | Fixed a bug that caused the reporting interval settings to have no effect on device activity reporting. |
| DEV-12903 | Conductor | Fixed an issue where syslog didn’t configure the first time on a new Conductor. |
| DEV-12748 | Conductor | Fixed an issue where an Airwall may crash when processing a large amount of broadcast traffic with many tunnels. |
Known Issues
| ID | Applies to | Description |
|---|---|---|
| DEV-13028 | Airwall Gateway | Airwall Gateway 150 has "could not detect attached switch" error. Workaround: Do a hard reboot. |