Deploy a Conductor

To set up a Conductor for the first time, you need to configure a few basic settings. After completing the following, you can connect the Conductor to your underlay.

Before you begin these steps

The Conductor manages policy for all distributed Airwall Edge Services, delivering simple control of the network. Confirm your existing network settings such as DHCP, DNS and firewalls to decide where your Airwall solution will exist within your environment. For more information, see Confirm your Network Settings.
Important: Do not connect any Airwall Edge Services or hardware until after the Conductor is configured.
Note: The Conductor uses a Tempered security certificate. This certificate is anchored to the Tempered Certificate Authority (CA). You may need to explicitly trust the certificate to connect to the user interface. If you would like to use your own certificate, see Install a Custom CA Certificate Chain.